In order to FTP into your website you will need the following information which was included in your account activation notice.
USERNAME
PASSWORD
FTP HOSTNAME
When you have this information, and a copy of Fetch installed on your computer,
you will be ready to setup a New Connection and FTP into your website.
1. Launch your Fetch program.
2. Select New Connection from the File menu to create a new Connection.
3. Enter the appropriate information into the entry boxes as indicated
below.
HOST: Enter yourdomain.com
USER ID: Enter your Username
PASSWORD: Enter your Password
DIRECTORY: Leave this entry field blank.
4. Click on the OK button to connect to your website on the server. When you are connected the New Connection panel will close, and the main Fetch window will pop up.
Bookmark Connection
Once you have established a connection you should bookmark it. This will
save you the time and trouble of entering your log in information each time
you want to FTP into your account.
1. From the Customize menu select New Shortcut.
2. A window titled Bookmark Editor will pop up. The Name, Host, and
User ID entry boxes will contain the information you used for your current
connection.
3. In the Type field, select File from the pop-up menu.
4. If you would like Fetch to remember your password, type it into
Password field.
5. Under the same Customize menu, choose Preferences, and make sure
the connection you just entered is selected as the default shortcut under
the General tab.
Your Bookmark has been created. The next time you run Fetch your shortcut will be opened automatically. All you'll have to do is click the OK button to establish your FTP connection.
Binary vs. ASCII or Auto
There are three radio buttons at the bottom of the Fetch Window. One labeled
Binary, one labeled ASCII and one labeled Auto.
If you want Fetch to automatically select the correct setting, either Binary
or ASCII, when transferring your files, do the following:
1. Select Auto in the Fetch window.
2. Select Preferences, then the Upload tab.
3. Be sure that the following settings apply:
Default text format---set to TEXT
Default non-text format-set to RAW DATA
Check "Add .bqx suffix to BinHex files"
Check "Add .bin suffix to MacBinary II files"
Uncheck "Add .txt suffix to text files"
Check "Encode and decode files and folder names"
Word Wrap Margin…72
If you elect not to use the Auto setting please note that it is very important
to transfer images in Binary mode. Everything else, HTML documents, cgi scripts
etc should be transferred using ASCII mode. If you fail to set this correctly
your files may not appear as they should.
Fetch Window
Your main window will be divided into two parts. On the left will be a large
window which will display the files and folders on your domain. The narrow
section on the right will contain your current Status, a File command link
and a Transfer command link.
Upload Files
1. Double click on the www directory in the Fetch window to open it.
This is the directory you will upload your web pages, files, images etc into.
2. Highlight the file (s) on your computer that you wish to transfer
to your website, and click on the Transfer command link. Or, you may also
drag the file(s) you wish to upload from your hard drive onto the Fetch window
and drop them into the appropriate directory.
Download Files
1. Double click on the folder you wish to download files to on your
computer to open it.
2. Highlight the file (s) on your website in the Fetch window that
you wish to transfer to your computer, and click on the Transfer command link.
Or, you may also drag the file(s) you wish to download from the Fetch window
onto your hard drive and drop them into the appropriate directory.